Ⓒ 2026, WRMDSV I LLC
An interrupted flashing process or incorrect firmware file can permanently ruin ("brick") your router.
If the prompt does not appear, try entering these sequences into the admin interface or a dialer (if available) to force the menu to open: ###825*09# *983*8284# *983*865625# Carrier Contact
Some older versions of ZTE MF910 firmware allow users to input AT commands directly through a terminal emulator (like PuTTY or HyperTerminal) once the device is in Diagnostic Mode.
Some versions of the ZTE MF910 interface have the unlock feature hidden within the JavaScript code. Connect your PC to the ZTE MF910 via USB . Open the web interface in Chrome ( 192.168.0.1 ). Navigate to the Network Settings page. Press to open Developer Tools. zte mf910 unlock firmware free
This guide is for educational purposes. The author is not responsible for any device damage. Always back up your original firmware before flashing.
The patch was created by a group of developers who had reverse-engineered the ZTE MF910's firmware and found a way to unlock it. Alex downloaded the patch and followed the instructions carefully.
Flashing a custom or de-branded unlock firmware lets you use any SIM card worldwide. This guide provides a detailed look at the ZTE MF910 unlocking process, the files required, and how to do it safely. Understanding ZTE MF910 Firmware Unlocking An interrupted flashing process or incorrect firmware file
: To trigger the prompt for an unlock code, insert a non-accepted SIM card from a different carrier. Power on your device and connect to its Wi-Fi network. Open a browser and go to the device's web interface, typically at http://192.168.0.1 or http://192.168.1.1 . It will likely display a message indicating the network is locked and ask for an unlock code. If the standard method doesn't work, remove the SIM card and dial ###825*09# from the device's interface. If that fails, try *983*8284# or *983*865625# to access the unlock menu.
This Encrypted code, along with your IMEI, is what paid unlocking services require to generate the permanent unlock code.
If Windows cannot see the device, try switching to a USB 2.0 port instead of a USB 3.0 port, or reinstall the ZTE drivers. Connect your PC to the ZTE MF910 via USB
If using DC-Unlocker, click the magnifying glass icon to detect the router, then type the following command and press Enter: AT+ZCDRUN=8 Use code with caution.
: Use the QPST Flash Tool for official ROM installation.
Often distributed as a PST (Product Support Tool) or a standalone executable ( MobiLink tool).
