Some Windows users report the 7.1 surround sound button stops working after updating. This often requires a driver reinstall through the Windows Device Manager.
: Many headsets shipped with "0.0.3.0" which was actually a typo for "0.0.0.3"—meaning 0010 is a definite upgrade.
Before running the executable file, ensure you have the following in place:
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
: hyperxcloudiifirmwareupdaterrev0010.exe
If the updater utility displays a "Device not found" error, your computer is not communicating properly with the USB dongle.
A: No. “If it ain’t broke, don’t fix it.” Firmware updates carry a small risk. Only update if you experience the specific issues mentioned above.
A small window will appear showing your current firmware version and the target release (0010). Click the button.
The HyperX_Cloud_II_Firmware_Updater_Rev_0010.exe file is a standalone update utility for the HyperX Cloud II (wired) Go to product viewer dialog for this item.
Disconnect all other USB audio devices to prevent hardware conflicts.
Maintains peak audio and microphone performance. How to Use HyperX_Cloud_II_Firmware_Updater_Rev_0010.exe
If your microphone sounds muffled or the audio channels are inverted after flashing Rev 0010, open the . Right-click the HyperX device, select Properties , navigate to the Advanced tab, and toggle the default sample rate format between 16-bit/44100Hz and 16-bit/48000Hz to force a hardware resync.
Released by Kingston (before HyperX was acquired by HP), the firmware revision 0010 was specifically targeted at improving the functionality of the USB sound card control box that comes with the wired HyperX Cloud II Key Fixes in Revision 0010:
: Essential Update for HyperX Cloud II Wired (Firmware 0010)
However, if your microphone volume is too low to use, or the 7.1 surround button isn't working, this is mandatory. Just ensure you carefully follow the official Kingston instructions , and it will likely solve your issues. If you're having trouble with the update, let me know:
If the update fails midway or the device stops working entirely, you need to force-flash the device. Open on your PC.
As with all firmware updates, interrupting this process (e.g., unplugging the USB while it's flashing) can "brick" the dongle, turning it into a useless piece of plastic. Verdict: Proceed with Caution, but Proceed Go to product viewer dialog for this item.
Here is a Feature Development Document for a to be integrated into the HyperX Cloud II Firmware Updater.
Windows USB drivers interfering or the updater expecting an older USB controller.
Exe File 2021 - Hyperxcloudiifirmwareupdaterrev0010
Some Windows users report the 7.1 surround sound button stops working after updating. This often requires a driver reinstall through the Windows Device Manager.
: Many headsets shipped with "0.0.3.0" which was actually a typo for "0.0.0.3"—meaning 0010 is a definite upgrade.
Before running the executable file, ensure you have the following in place:
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
: hyperxcloudiifirmwareupdaterrev0010.exe hyperxcloudiifirmwareupdaterrev0010 exe file 2021
If the updater utility displays a "Device not found" error, your computer is not communicating properly with the USB dongle.
A: No. “If it ain’t broke, don’t fix it.” Firmware updates carry a small risk. Only update if you experience the specific issues mentioned above.
A small window will appear showing your current firmware version and the target release (0010). Click the button.
The HyperX_Cloud_II_Firmware_Updater_Rev_0010.exe file is a standalone update utility for the HyperX Cloud II (wired) Go to product viewer dialog for this item. Some Windows users report the 7
Disconnect all other USB audio devices to prevent hardware conflicts.
Maintains peak audio and microphone performance. How to Use HyperX_Cloud_II_Firmware_Updater_Rev_0010.exe
If your microphone sounds muffled or the audio channels are inverted after flashing Rev 0010, open the . Right-click the HyperX device, select Properties , navigate to the Advanced tab, and toggle the default sample rate format between 16-bit/44100Hz and 16-bit/48000Hz to force a hardware resync.
Released by Kingston (before HyperX was acquired by HP), the firmware revision 0010 was specifically targeted at improving the functionality of the USB sound card control box that comes with the wired HyperX Cloud II Key Fixes in Revision 0010: Before running the executable file, ensure you have
: Essential Update for HyperX Cloud II Wired (Firmware 0010)
However, if your microphone volume is too low to use, or the 7.1 surround button isn't working, this is mandatory. Just ensure you carefully follow the official Kingston instructions , and it will likely solve your issues. If you're having trouble with the update, let me know:
If the update fails midway or the device stops working entirely, you need to force-flash the device. Open on your PC.
As with all firmware updates, interrupting this process (e.g., unplugging the USB while it's flashing) can "brick" the dongle, turning it into a useless piece of plastic. Verdict: Proceed with Caution, but Proceed Go to product viewer dialog for this item.
Here is a Feature Development Document for a to be integrated into the HyperX Cloud II Firmware Updater.
Windows USB drivers interfering or the updater expecting an older USB controller.