Viva Water Dispenser Manual 8liech-sc-ssd

Toggle the cold switch (usually green) to ON. The cold indicator light will shine.

The Viva Self-Cleaning Bottom Loading Water Dispenser (Model 8LIECH-SC-SSD) features a hidden 3-5 gallon bottle design with automated self-cleaning every 4 hours. Installation requires 4 inches of clearance for airflow, a 4-hour settling period if transported on its side, and activation via rear hot/cold switches. For the full manual and technical specifications, visit the Viva Service Portal . viva water dispenser manual 8liech-sc-ssd

Manufactured under the Electrotemp Technologies brand, the Viva 8LIECH-SC-SSD is a known for its sleek modern aesthetics, smart hygiene features, and dependable operation. This comprehensive guide covers everything you need to know, from initial setup and daily operation to proper cleaning, maintenance, and troubleshooting—all based on official documentation for this specific model. Toggle the cold switch (usually green) to ON

Note: If the empty bottle sensor magnet is missing, the dispenser will flash a red “Empty” light even when full. Installation requires 4 inches of clearance for airflow,

: Use a grounded 3-prong 120V outlet. Do not use an extension cord or adapter, as these can pose a fire hazard. Bottle Installation : Clean the neck and cap of a 3 or 5-gallon water bottle. Remove the entire plastic cap from the bottle.