How long the voltage must be faulty before the device cuts power (0.1 - 30 seconds). 4. Setting the Device to Factory Defaults
Continue pressing SET until "END" appears on the display. Press SET one last time to save and exit; otherwise, the data will not be valid. Indicator Lights: Green: Normal power supply. Red: Fault condition (over/under voltage or current). Wiring Instructions
Fully adjustable thresholds for voltage, current, and action time. Sinotimer Svp-916 Manual Pdf
Run the Phase/Live wire supplying your appliances from the OUT L terminal. Run the Neutral wire to the OUT N terminal.
If you configured A11 (Continuous over-current limits) and the device trips sequentially past your set threshold, it will lock out permanently for safety. You must manually cycle power or long-press SET to safely reset the circuit. How long the voltage must be faulty before
Finding the official manual for the can be difficult because the manufacturer (Sinotimer) often relies on third-party retailers to host the files, and their website interface is not always user-friendly.
I can provide tailored settings recommendations based on your local grid conditions. Share public link Press SET one last time to save and
This is the recovery delay (P3/P6) working to protect appliances from unstable power cycles.
remains connected. Ensure L and N are not reversed during wiring. Upstream Protection: This device does