Empi 300pv User Manual Top ((new)) Jun 2026
| Problem | Possible Cause(s) | Solution(s) | | :--- | :--- | :--- | | | Dead batteries; Battery contact failure | 1. Try fresh Energizer or Eveready alkaline batteries. 2. Ensure batteries are inserted correctly. 3. Check battery contacts. | | Stimulation is Weak | Dried out or poorly placed electrodes; Old/damaged lead wires | 1. Replace electrodes. 2. Ensure electrodes are at least 2 inches apart. 3. Replace lead wires. | | Stimulation is Uncomfortable | Intensity is too high; Electrodes too close together | 1. Decrease the amplitude (intensity). 2. Reposition the electrodes so they are at least 2 inches apart. | | No Stimulation on One Side | Worn/damaged lead wire or electrode | Try each lead wire independently in each channel. If a lead wire produces no output, it is defective and should be replaced. | | Device On but Not Responding | Panel unresponsive | Disconnect all patient cables, remove the batteries, wait 10 seconds, then reinsert the batteries. | | How to Unlock the Device | Device is locked by clinician | Press and hold the PAUSE and PREV (left arrow) buttons simultaneously immediately after turning the device on until the UNLOCK prompt appears. |
Use self-adhesive, reusable electrodes, ensuring they are stored in a sealed bag.
: Clean and thoroughly dry the treatment area before applying electrodes. Electrode Placement empi 300pv user manual top
Replace the batteries immediately. Verify the battery polarity matches the diagram inside the compartment.
The device combines four clinical modalities into a single unit to address diverse rehabilitation needs: | Problem | Possible Cause(s) | Solution(s) |
Do not use if you have an implanted cardiac pacemaker or defibrillator.
: Includes an external port for a hand or foot remote switch, which is highly beneficial during functional gait training. Critical Operational Shortcuts Ensure batteries are inserted correctly
Set the execution contract time ("On Time"), rest window ("Off Time"), and the gradual buildup duration ("Ramp Time") up to 5 seconds. Continuous stimulation defaults the "Off Time" to zero.
Slowly increase the intensity for the active channels by pressing the "Up" arrow keys Enovis.
If you are storing the stimulator for an extended period (more than 30 days), remove the batteries and store the device in a cool, dry place. For storage of two weeks or more, always remove the batteries.