P100 Manual English | Ivoclar Programat
: Includes vacuum indicators (LED), error message displays, and specialized fuses for the heating element and vacuum pump. Technical Specifications Specification Max. Firing Temperature Firing Chamber Dimensions Diameter: 80 mm; Height: 48 mm Power Supply 110–120 V or 200–240 V (50–60 Hz) Base: 13.5 kg; Head: 4.5 kg Vacuum Pump Max power consumption: 2.1 A; Final vacuum: < 50 mbar Operating Instructions Installation
) firing parameters. Regular calibration is maintained via the ATK2 automatic system or a manual silver test, with specific safety protocols for operating the furnace head. Consult the full Scribd operating instructions for detailed, step-by-step programming. Programat P100: Operating Instructions | PDF - Scribd
If the manual is not available online for an older model, the manufacturer can provide it.
Regularly remove dust and debris using a soft brush.
Clean the firing chamber regularly to remove debris. ivoclar programat p100 manual english
The is a classic dental furnace used for firing dental ceramics. Since it is an older model, finding a physical manual can be difficult, but digital versions and technical summaries are available through specialized dental resources. 📖 Essential Manual Sections
According to official product descriptions, the Programat P100 features:
Setting up your Programat P100 correctly ensures consistent firing results.
Run the dedicated calibration program (or set a custom program to heat up to exactly 961°C without vacuum). : Includes vacuum indicators (LED), error message displays,
Available in 110–120V AC or 200–240V AC configurations (50/60 Hz). Maximum Firing Temperature: 1200°C (2192°F).
Ivoclar Programat P100 Manual English: Complete User Guide The is a classic, reliable ceramic furnace designed for dental laboratories looking for precise, high-quality firing of dental ceramics. Whether you are a seasoned dental technician or new to the laboratory, understanding the correct operating procedures is essential for optimal porcelain results.
Arrow keys used to input specific parameters like temperature rise rate, hold time, and vacuum levels.
| Error Code | Meaning (per English manual) | Solution | |------------|-------------------------------------|--------------------------------------------------------------------------| | Err 1 | Thermocouple open circuit | Check wiring; replace thermocouple. | | Err 5 | Furnace temperature too high | Check relay; may need to power cycle. | | Err 13 | Heating rate too slow | Clean muffle; check heating elements for wear. | | Err 15 | Cooling rate too fast | Ensure door seal is intact; avoid drafts. | Regular calibration is maintained via the ATK2 automatic
Navigating the P100 involves setting specific parameters via the keypad.
Press the and V2 keys to set your vacuum window. If no vacuum is required, set these values to zero.
Accurate temperature is critical. Use the "Silver Test" to calibrate the unit: Silver Calibrating Tester and silver rods from