Vw Polo 6n Dashboard Removal Updated

Use standard radio removal keys to slide the head unit out. Disconnect the wiring loom and antenna.

Open both front doors. Pop off the plastic end caps on the left and right profiles of the dashboard. Remove the heavy-duty bolts anchoring the dash to the A-pillars.

Remove the plastic trim surround in front of the speedo—usually held by two screws pointing upwards into the top of the binnacle. Once the trim is out, remove the screws holding the cluster itself. Lean the cluster forward, reach behind to unplug the blue and green wiring harnesses, and lift it out. Step 4: Passenger Side and Glovebox

Pop off the plastic surround enclosing the three rotary heater dials. Remove the four Phillips screws holding the heater control unit to the frame. Push the control unit backward into the dash cavity (you do not need to disconnect the mechanical bowden cables). vw polo 6n dashboard removal updated

Move both front seats as far back as possible to provide room.

Old guides forget to mention that over the years, previous owners may have added screws, or clips may have broken and been replaced by self-tappers. Keep your eyes peeled for non-standard screws.

Remove the holding the plastic bezel/trim around the instrument cluster. Carefully unclip the bezel. Use standard radio removal keys to slide the head unit out

While possible to keep it, removing the steering wheel makes the job significantly easier. 📋 Step-by-Step Dashboard Removal Process 1. Removing the Steering Column Cowling

Reinstalling the dashboard is the direct reverse of the removal process. However, here are a few critical checks before you put everything back together:

Are you doing this to or for another repair? Does your Polo 6N have dual front airbags ? What year model or specific engine trim is your car? Share public link Pop off the plastic end caps on the

You should also take the time to gather all the necessary tools and materials to avoid interruptions during the job:

Required if the stock head unit is still installed.

the plastic screws; they can easily strip the plastic housing.