: Gently pull on the unit to confirm it is locked and does not slide freely. Option B: Surface Wall Mounting
Enables direct control of a door strike or relay.
Be aware of the following critical specifications for proper power and environmental planning:
Confirm your local power supply matches the voltage specifications on the TS1162 unit label (typically available in 110V–220V AC or 12V/24V DC variants). ts1162 installation manual
: Use DIP switches 1 through 4 to set the RAS address required for the Challenger system.
Ensure the Challenger system can support the additional current draw of the keypad.
: Brief technical details and features can be found on the Ness Corporation product page . Key Installation Specifications : Gently pull on the unit to confirm
To ensure a smooth installation, gather the necessary tools and review the device's specifications.
Attach the leading edge of the ribbon to an empty cardboard core using the adhesive strip on the ribbon leader.
[ TS1162 BACK TERMINAL SCHEMATIC ] +-------------------------------------------------+ | (1) (2) | (3) (4) | (5) (6) | (7) (8)| | POWER SUPPLY| SENSOR | RELAY | ALARM | | N L | (NTC/PT100)| OUTPUT | OUTPUT | +-------------------------------------------------+ : Use DIP switches 1 through 4 to
Confirm that the mounting location meets the temperature, humidity, and vibration requirements stated in the technical specifications. 3. Unpacking and Inspection Carefully unpack the TS1162 unit.
Proper preparation is the foundation of a successful installation. Before unboxing your TS1162, ensure your workspace and system environment meet all technical requirements. Tool Checklist Gather these essential tools before beginning the process: Phillips (#2) and flat-head. Precision Level: To ensure perfectly straight mounting. Wire Strippers/Crimpers: For clean electrical connections. Digital Multimeter: To verify voltage and ground safety. Power Drill: With appropriate masonry or wood drill bits.