Select the height: Use the highest setting for newborns and lower it as the child grows.
Before placing your baby in the Bonavita Sheffield crib for the first time, run through this checklist from the final page of the instructions:
Optional Bonavita Sheffield Toddler Guardrail (sold separately).
Verify that all bolts, nuts, and tools (usually an Allen wrench) are present against the parts list in your manual. bonavita sheffield lifestyle crib instructions
If you have the Sheffield Toddler Guardrail (sold separately), attach it to the front base using the existing bolt holes. Maintenance and Care
Insert the barrel nuts into the pre-drilled holes on the side rails first, ensuring the slotted side faces outward to accept the bolt.
Check all wooden panels for cracks, splinters, or shipping damage before beginning. 🔩 Hardware and Component Checklist Select the height: Use the highest setting for
Do you need assistance ?
The tall back panel becomes the full-size headboard. The front gate becomes the footboard.
| Quantity | Part Name | |----------|------------| | 1 | Left side panel | | 1 | Right side panel | | 1 | Headboard | | 1 | Footboard | | 1 | Mattress support platform | | 4 | Support legs (for full-size bed conversion) | If you have the Sheffield Toddler Guardrail (sold
: Instructions typically begin by attaching the left and right panels to the back rail using bolts and barrel nuts. Mattress Support : The base can be set at four different heights
Do not fully tighten the bolts until the entire frame is assembled to allow for adjustments. Step 2: Attach the Front Rail
: Needed to hold the barrel nuts in place while tightening bolts.
Carefully inspect each component for any signs of damage, such as scratches, dents, or broken parts. If you notice any defects, contact Bonavita's customer support immediately.
Identified by pre-drilled holes facing inward. Right Side Panel: Mirror image of the left side panel.