Kes Geyser Load Control Timer Manual New -

System clock is inaccurate or configured for AM instead of PM.

Displays the current day of the week, time (HH:MM:SS), current operation mode (ON, AUTO, OFF), and active program numbers.

All programs include a "Lock out" period during peak times (typically 06:00–08:00 AM and 18:00–20:00 PM ) to prevent high-cost energy use. Checking the Real-Time Clock (RTC) To verify if the timer has the correct time and day: Hold the Override and Program buttons together.

Avoids heating during high-tariff morning and evening peak hours. kes geyser load control timer manual new

Always turn off the main power and geyser isolator before attempting installation.

Exits programming mode to return to the real-time display. Hold this button down while pressing D+, H+, or M+ to set the system clock.

In an era of rising energy costs and increasing focus on sustainability, managing household electricity consumption is more important than ever. One of the largest energy consumers in a typical home is the geyser (hot water cylinder). A KES Geyser Load Control Timer Go to product viewer dialog for this item. System clock is inaccurate or configured for AM

The override typically lasts for one hour (or until the next programmed event).

Set your timer for periods that align with your hot water usage. Many users find that a morning block (e.g., 04:30 – 06:30) and an evening block (e.g., 17:00 – 21:00) provides plenty of hot water while avoiding peak electricity demand times.

Press to advance to the current hour. The device utilizes a 24-hour clock format (e.g., 14:00 for 2:00 PM). Press M+ to advance to the correct minute. Release the Clock button. The clock is now running. 4. Programming Scheduled Timer Cycles Checking the Real-Time Clock (RTC) To verify if

Do not exceed the maximum rated current of the device. Overloading the timer can cause catastrophic hardware failure, melting, or fire.

The (specifically model ISG1201 ) is a specialized device designed to manage water heating and reduce energy bills by preventing operation during peak demand periods. Unlike standard digital timers that require complex manual scheduling, the KES model uses pre-programmed operating profiles to simplify user interaction. Understanding Your KES Geyser Timer (ISG1201)

: The unit can be surface-mounted (e.g., in a ceiling cavity near the geyser) or DIN-rail mounted directly inside the DB panel. Wiring (DB Mount) :

Installation should be performed by a qualified electrician. : The unit can be mounted on a