Select and click Next. Choose TCP/IP Device as the device type.
Download or a similar Xprinter-compatible app from the Google Play Store.
Select the Xprinter driver you installed in Step 1. Finish Setup: Complete the wizard to print a test page. Step 4: Printing from Mobile Devices (Optional)
For a single desk setup? No. USB is faster and never drops a signal. xprinter xp420b wifi setup
to find your Wi-Fi network, select it, and enter your password. to save the settings. The tool should display an IP address for the printer; copy this down. Add Printer Port: Settings > Devices > Printers & Scanners on your PC. Select your installed XP-420B, click Printer Properties tab, click Add Port > Standard TCP/IP Port > New Port Paste the printer’s IP address into the field and complete the wizard. Mobile Device Setup (Android/iOS)
Here’s a step-by-step write-up for setting up the (Wi-Fi model). Note: The XP-420B usually comes in USB + Ethernet + Wi-Fi variants. This guide assumes yours has the built-in Wi-Fi module.
The printer will automatically feed a few labels to detect the gap size. Step 2: Configure Wi-Fi via Xprinter Utility (Windows) Select and click Next
Enter your exact Wi-Fi password in the or Password field.
For stable network communication, it is best to assign a static IP to your printer. Locate the DHCP setting and turn it off (disable). Enter a free, local IP address for your network (for example, 192.168.1.200 or 10.0.0.50 ). Ensure this IP address is not already used by another device on your network. Click the “Set” button to save this IP configuration .
Re-install the drivers and make sure the correct USB-to-network port is selected in printer properties. Printing from Mobile Devices (Android) The XP-420B can print wirelessly from mobile apps: Select the Xprinter driver you installed in Step 1
It's best to get everything ready before powering on the printer. This saves time and helps avoid common setup errors later.
If your router changes its mind and gives the printer a new IP address later, the connection might "break." Leo solved this by setting a
If you used DHCP, your router likely changed the printer's IP address. Change the printer's configuration to a Static IP using the diagnostic tool to prevent this.