Check the axis rods. Wipe them clean with a lint-free cloth and apply a thin layer of high-grade synthetic grease or sewing machine oil to the linear rails and Z-axis lead screw.
Push the filament straight down into the feed hole on top of the chosen extruder while pressing the spring-loaded release lever.
The QIDI Tech X-Pro is a precise, dual-extrusion 3D printer designed for tech enthusiasts, educators, and professionals. Utilizing a robust metal frame and an enclosed printing chamber, it excels at handling temperature-sensitive materials like ABS, PLA, and PETG. qidi x-pro manual
The X‑Pro uses a four‑point manual leveling system. To level the bed:
Push the filament into the top hole of the extruder assembly while pressing down on the spring-loaded tension lever. Check the axis rods
Connect the power cord to the back of the printer and plug it into a grounded outlet. Flip the power switch to the position.
Adjust the plastic wing nut directly under that corner until you feel a slight friction/resistance when pulling the paper. The QIDI Tech X-Pro is a precise, dual-extrusion
The X-Pro runs Marlin firmware. You can update it directly from the printer's screen:
Push the filament in until the motor catches it and you see plastic extruding smoothly from the nozzle. Unloading Filament Navigate to > Unload . Select your desired extruder and wait for it to heat up.