This technical guide covers how to identify your flash drive controller, step-by-step firmware flashing instructions using MpTools, and how to safely download the required utility. Understanding FirstChip FC1178 and FC1179 Controllers
Open the folder and run MpTools.exe as Administrator (Right-click -> Run as Administrator).
Often, you might purchase a drive that is advertised as holding 128 GB or even 1 TB, but in reality, it may only hold 16 GB to 32 GB of actual flash memory. These counterfeit drives are firmware-hacked to display the fake capacity. When the drive fills up, data becomes corrupted.
Adjust your targets based on preference: choose Speed Priority if you want faster transfer rates, or Capacity Priority if you want the tool to save as many marginal blocks as possible.
FirstChip MpTools is an incredibly powerful tool for recovering and repairing USB drives with FC1178 and FC1179 controllers. By downloading the latest version and carefully following the troubleshooting steps, you have an excellent chance of restoring your drive to full working order. Good luck! firstchip fc1178 fc1179 mptools v1052 link
. Do not use these tools on Phison, SMI, or Alcor controllers.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. FirstChip FC1179 MpTools V1.0.7.2 (2024-02-21) - USBDev.ru
Includes and 2-Stage Scan modes to isolate corrupt sectors. Partition Control
Click the primary button on the main dashboard screen. The tool will cycle through checking memory blocks, clearing bad sectors, writing fresh firmware, and rebuilding the partition map. This process takes anywhere from 5 minutes to over an hour depending on the true capacity and speed of the NAND flash memory chip. This technical guide covers how to identify your
USB flash drives are built using two core components: the NAND flash memory chip (which stores the actual files) and the controller chip (the brain that manages data flow and communicates with your computer).
Download a hardware analysis tool like ChipGenius or Flash Drive Information Extractor.
(Mass Production Tools) are specialized software utilities for managing USB flash drive controllers. They go beyond simple formatting by directly communicating with the NAND flash memory to fix corrupted firmwares, re-map bad blocks, and reset the drive to its original factory state. Key Features of V1.0.5.2 (2022 Release):
: Click Start to begin the scanning and flashing process. Note that a full scan for a 16GB–32GB drive can take up to an hour. Pro Tips for Success These counterfeit drives are firmware-hacked to display the
: If prompted for a password when clicking "Settings," try leaving it blank and clicking OK, or use common defaults like 123456 .
: An older, highly versatile controller variant handling multiple older MLC and TLC NAND flash configurations.
This lighter utility performs high-level structural sorting. It is best used for minor corruptions or when the NAND flash chip inside the drive is of a known high quality.