Epson L1300 Adjustment Program 69 Hot Portable Jun 2026

If you are looking to download the program, check tech forums or specialized printer repair sites like mnogochernil.ru or sivir.ru for safe versions, as mentioned in.

If you have performed Fix #1 and #2 and the Adjustment Program still shows "69 Hot," the print head is dead.

Open the maintenance hatch at the back or bottom of the unit to inspect the saturation level of the white felt pads.

: Dirt, grease, or ink mist on the transparent timing strip prevents the optical sensor from locating the carriage position. epson l1300 adjustment program 69 hot

Click on the button. A prompt will appear asking you to confirm the action. Click OK .

| Problem | Likely Fix | | :--- | :--- | | Program doesn’t detect printer | Install Epson L1300 driver first. Use USB 2.0 port (not USB 3.0 hub). | | “Communication error” | Disable antivirus temporarily. Run as Admin. Use Windows 7/10 (not 11). | | Reset works but error returns next day | Counter was reset, but pads are physically full. Clean pads or install waste tank. | | Program asks for a “key” or “license” | You downloaded a fake/cracked version. Find the free community version (no key required). |

: Resets the secondary counter for ink collected during borderless or wide-format printing. Check/Initialization If you are looking to download the program,

Before you panic, this guide will explain exactly what the "69 Hot" error means, why the Adjustment Program flags it, and step-by-step methods to fix it.

If none of these steps resolve the issue, the error likely indicates a genuine hardware failure on the main board, requiring professional diagnosis from an Epson-certified service center.

Click on the Particular Adjustment Mode button on the main screen. : Dirt, grease, or ink mist on the

: Clearing the "End of Service Life" error (Error E-11) when the internal ink absorber sponges are saturated.

Make sure you downloaded the specific L1300 Adjustment Program. Using an adjustment program meant for an L300 or L800 series will result in error codes or failure to communicate.

Click the button to view your current usage percentage.

Scroll through the maintenance menu, select Waste ink pad counter , and click OK .