Bnd50 Se36 Instructions Full !!install!! Today

Press "PROG" once. The screen will show "1 ON" .

Tells the device to follow your custom programmed schedule. Crucial Tip for AUTO Mode

: Manually overrides the timer to be permanently on or off.

16A, 3500W (Resistive), ~680W (Inductive/Motor loads) Time Settings Minimum Interval: 1 Minute bnd50 se36 instructions full

What are you plugging into the timer? Is your unit the single-outlet or dual-outlet variation?

The is a 24-hour programmable electronic plug-in timer designed to automate indoor lights and household appliances. This model features a clear LCD display and integrated circuit technology for accurate, multi-functional scheduling.

The WEEK button is used during programming to select specific days for a timer event. This is a powerful feature for customizing schedules. While in programming mode (e.g., 1ON is on the screen), press the button repeatedly to cycle through the following options: Press "PROG" once

If you want a tailored step-by-step procedure, wiring diagram, torque specs, or OEM part numbers for the exact BND50 SE36 model, provide the device type (compressor, generator, etc.) or upload photos/manual pages and I’ll produce a detailed service checklist and parts list.

Hold down the "CLOCK" button and press the "MIN" button to set the minutes. 3. Programming ON/OFF Times The BND-50/SG3 allows up to 8 different ON/OFF programs.

To make your programs active, the timer must be in the correct mode. Press the (or ON/AUTO/OFF) button to cycle through options. ON: The outlet is permanently ON. Programs are bypassed. AUTO: The timer follows your scheduled programs. OFF: The outlet is permanently OFF. Programs are bypassed. Note: For daily programming, set the timer to AUTO . 5. Random/Vacation Feature (Optional) Crucial Tip for AUTO Mode : Manually overrides

This section covers the common digital BND-50 models.

| Terminal | Label | Function | |----------|-------|----------| | 1 | VIN+ | 12–24V DC power input | | 2 | GND | Power ground | | 3 | IN1 | Input 1 (dry contact or 0-30V DC sense) | | 4 | IN2 | Input 2 | | 5 | COM | Common for relay output | | 6 | NO | Normally open relay contact | | 7 | NC | Normally closed relay contact | | 8 | ANT | SMA antenna connector (for SE36 wireless pairing) |