Biosystems Bts 350 — User Manual __full__

The BTS-350 is designed for low maintenance, but regular care is essential for peak performance and longevity. The service manual details the need for trained personnel to perform deeper checks, but the user manual outlines tasks for daily upkeep.

If you can tell me if you are looking for the , programming instructions , or troubleshooting a specific error code , I can provide a more tailored answer. Let me know what you need. Share public link

Open the printer cover, check the thermal paper orientation, and clear any obstructions.

Biosystems BTS-350 User Manual: A Comprehensive Guide to Operation and Maintenance

Run an intensive fluidic wash cycle to dislodge air bubbles. Clean the flow cell with deproteinizing solution. If the error persists, check the lamp voltage or contact technical support for LED replacement. "Aspiration Failure" or "Incorrect Volume" biosystems bts 350 user manual

Select from Kinetic, End Point, Fixed Time, or Ratiometric. Daily Operation Procedure

Equipped with a graphic LCD screen and an integrated thermal printer. Technical Performance Data Light Source: Light Emitting Diodes (LED). Wavelengths: 340, 405, 505, 535, 560, 600, 635, and 670 nm. Photometric Range: 0.0 to 3.5 Absorbance Units (A).

Allows laboratory managers to enter new assay parameters, including calculation factors, wavelengths, normal ranges, and calibration curves.

Analyze normal and pathological control serums daily before processing any patient specimens. The BTS-350 is designed for low maintenance, but

| Error Code | Meaning | Immediate Action | |------------|---------|------------------| | | Cuvette not detected | Open lid, reseat cuvette wheel, run Cuvette Check | | E-205 | Aspiration failure | Check reagent probe for clogs. Clean with probe wash solution (not alcohol). | | E-309 | Temperature out of range (34–38°C) | Allow 15 min warm-up. Check incubator block for debris. | | E-417 | Lamp low energy | Run lamp intensity test. Replace if <40% of reference value. |

The official manuals are the definitive sources of information. They are typically provided as a hard copy with the instrument and on the included CD-ROM. However, digital versions can be found online.

Wait 15 minutes for the optical system and the incubator block to reach thermal equilibrium.

According to standard operating procedures (which would be found in your manual), you should never just turn the unit on and walk away. Let me know what you need

Plot the resulting data points on a Levey-Jennings control chart.

: For technical staff and repair information, including schematics and adjustment procedures, refer to Elektrotanya or Frank's Hospital Workshop .

Reliable results depend on proper calibration and regular quality control checks. The BTS 350 provides flexible calibration options.

Routine preventative cleaning prevents clogs, protein buildup, and inaccurate baseline shifts. Daily Maintenance Tasks