Skip to main
Skip to main
Bosch Sensortec

Ms7860 Ver 12 Motherboard Specs !!install!! <95% Fast>

Realtek RTL8151GH-CG 10/100/1000 Gigabit Ethernet Controller. Audio: Realtek ALC221 Codec (High Definition Audio). 5. Rear I/O Panel (Back Panel) USB 2.0 Ports. VGA (D-Sub) Video Output. DVI-D Video Output. RJ45 LAN Jack. Audio Jacks (Line-in, Line-out, Microphone). 6. Power & Form Factor Form Factor: - HP Customized Layout). Power Connectors: ATX Main Power + ATX 12V Power. Key Features and Considerations Reliable Performance for Business

Disclaimer: Specifications are based on common HP ProDesk 400 G1/G2 documentation and may vary slightly based on the specific sub-model.

What is your primary goal for this motherboard? ms7860 ver 12 motherboard specs

This board is for:

Also often compatible with 718413-001, 718413-501, and 718775-001 motherboard part numbers. Conclusion The MS-7860 Ver 1.2 Realtek RTL8151GH-CG 10/100/1000 Gigabit Ethernet Controller

Intel H81 chipset (some variants might be identified as H87 in earlier documentation). 2. Memory (RAM) Type: DDR3 SDRAM (Dual Channel). Slots: Typically 2x DIMM slots. Capacity: Supports up to Speed: Supports DDR3 1333/1600 MHz. 3. Expansion Slots PCI Express x16: slot for graphics cards. PCI Express x1: slots for additional peripherals. 4. Storage & Connectivity SATA Connectors: (SATA III) and (SATA II) ports.

Some owners have reported intermittent USB device disconnections, with keyboards or mice temporarily failing and reconnecting with the familiar “device disconnected” system sound. This has been traced to potential USB controller issues, and some users have resolved it by adding a PCIe USB expansion card. Rear I/O Panel (Back Panel) USB 2

2 x DisplayPort 1.2, 1 x VGA port (supports triple monitor setups with integrated graphics) Networking: 1 x RJ-45 (Intel I217LM Gigabit Ethernet) Audio: Line-in and Line-out (3.5mm jacks) Legacy: 2 x PS/2 ports for mouse and keyboard 6. Power and Installation Notes It is vital to note that the MS-7860 Ver 1.2

Because this is an OEM board, upgrades are limited by the HP BIOS, not just the hardware.