Hpe Smart Array S100i Sr Gen10 Driver Windows Server 2022 -

You cannot use a .exe installer during the bare-metal Windows installation phase. You must extract the raw driver binaries ( .inf , .sys , .cat ). Download the executable to a separate working Windows PC.

to enable Software RAID mode before starting your installation?

Works after some effort – not plug-and-play Rating: ⭐⭐⭐☆☆ (3/5)

A common issue during installation is that the driver is not recognized, even after loading the USB drive. hpe smart array s100i sr gen10 driver windows server 2022

Select the identified driver and click . Your RAID volume should now appear in the list. Select the volume and continue the installation. Alternative: Assisted Installation

HPE Smart Array S100i SR Gen10 under “Storage controllers.”

If you installed Windows using a temporary disk and need to configure the Go to product viewer dialog for this item. afterwards, or if you are updating an existing server: Obtain the driver from the HPE Support Site . Execute: Run the cpXXXXXX.exe file on the server. You cannot use a

According to HPE Documentation , there are two primary ways to install the driver: :

Filter the Operating System subcategory to .

During the "Where do you want to install Windows?" step, click Load Driver and browse to the extracted folder on your USB. Automation Option: HPE Intelligent Provisioning to enable Software RAID mode before starting your

If the driver loads but disks still don’t appear, ensure your drives are configured in a valid RAID array via HPE S100i BIOS (press F10 during boot → System Configuration → S100i).

Set to Smart Array SW RAID Support .

You must use HPE’s signed driver for the S100i.

: Supports RAID 0, 1, 5, and 10 for SATA drives.