Trane Baysens019c Manual !full! Direct

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

| | Description | Values | |---------|----------------|-------------| | 1 | Morning warm‑up | 0=Disabled, 1=Enabled | | 2 | Economizer override | 0=Disabled, 1=Enabled | | 3 | Temperature scale | 0=°F, 1=°C | | 4 | Supply air tempering | 0=Disabled, 1=Enabled | | 5 | Time format | 0=12 h, 1=24 h | | 6 | Smart fan | 0=Disabled, 1=Enabled | | 7 | Intelligent recovery | 0=Disabled, 1=Enabled | | 8 | Programmable days/week | 0=7 days, 1=3 days (M‑F, S, S), 2=2 days (M‑F, S‑S), 3=1 day (Sun‑Sat) | | 9 | Programmable periods/day | 2, 3, or 4 | | 10 | Programmable fan operation | 0=Disallowed, 1=Allowed | | 11 | Remote sensor installed | 0=No, 1=Yes | | 12 | Check filter interval | 0=Disabled, 3000–50 h (50‑h increments) | | 13 | Display zone temperature | 0=No, 1=Yes | | 14 | Keypad lockout | 0=Disabled, 1=Enabled | | 15 | Default override time | 1–5 (hours) | | 16 | Buzzer options | 0=Key press only, 1=Key press+check filter, 2=Key press+check filter+system failure | | 17 | Zone temperature calibration | Adjust as needed | | 18 | Baud rate | 0=1024, 1=1200 | | 19 | CV or HP | 0=CV, 1=HP | | 20 | Default cooling setpoint | 45–98 °F | | 21 | Default heating setpoint | 43–96 °F | | 22 | Minimum cooling setpoint | 45–98 °F | | 23 | Maximum heating setpoint | 43–96 °F | trane baysens019c manual

Miller texted back a thumbs up emoji.

When the user temporarily changes set points, the display shows "OVERRIDE" and the OCCUPIED icon blinks. Pressing cancels the override and returns to the programmed schedule. This public link is valid for 7 days

Press again. The heating setpoint temperature will flash. Use the arrows to set the heating target. Can’t copy the link right now

Toggle between F (Fahrenheit) and C (Celsius). 4. How to Program the BAYSENS019C

This override remains active until the next scheduled period begins. Manual Occupied Override