| Specification | Value | | :--- | :--- | | | 475 x 480 x 420 mm | | Weight | Approx. 15-16 kg | | Power Supply | 220V AC ±10%, 50/60 Hz | | Total Power Consumption | 1250 W | | Upper Heater | 400 W, dark infrared, 80×80 mm | | Bottom Heater | 800 W, 180×180 mm | | Maximum Temperature | 400°C | | Max. PCB Size | 400 × 305 mm | | Max. Chip Size | 70 × 70 mm |
4. Programming Thermal Profiles for Lead-Free and Leaded Soldering
: Includes emergency shutdown triggers if temperatures fall below safe thresholds during a run. Smart Preheating achi ir6500 software
The IR6500 uses a serial connection disguised as a USB port. You will likely need the or PL2303 driver (depending on your unit’s internal chip). Plug the USB cable into your PC. Open Device Manager .
Electromagnetic interference (EMI) from the heater relays messing with the USB connection. | Specification | Value | | :--- |
The is widely recognized as a high-performance, professional-grade infrared (IR) soldering and rework station, primarily used for repairing surface-mounted device (SMD) components, BGAs (Ball Grid Arrays), and other heat-sensitive electronic assemblies. However, the hardware is only half the story. The ACHI IR6500 Software is the critical interface that transforms this machine from a simple heat source into a precision thermal engineering tool.
For firmware updates, detailed protocol specifications, or distributor contacts, refer to the official ACHI documentation included with your IR6500 unit. Chip Size | 70 × 70 mm | 4
While the IR6500 can be operated manually using its built-in programmable temperature control tables, the PC software provides a more granular level of control. It allows technicians to: Create and Save Profiles
Program, edit, and save specific thermal profiles (curves) for leaded and lead-free soldering.
It’s much easier to tweak a "soak" time or "reflow" peak on a screen than on a small segment display.
The transforms a manual heat lamp into a precision engineering tool. While the initial setup of drivers and COM ports can be a bit of a hurdle, the level of control it provides over your BGA repairs is well worth the effort.