Epson 1390 Resetter //top\\ Jun 2026

Keep the Main Pad Counter box checked. Click the Initialization button.

Keep the Main Pad Counter box checked, then click the Initialization button.

If you reset the counter multiple times without addressing the physical pads, the ink will eventually overflow and ruin the printer or damage your workspace.

Epson printers feature internal felt pads designed to absorb excess ink during head cleanings and printing. The printer uses a digital counter to estimate when these pads are full. epson 1390 resetter

The printer status monitor on your PC displays: "A printer's ink pad is at the end of its service life." The printer refuses to execute any print jobs. What is an Epson 1390 Resetter?

Your Epson Stylus Photo 1390 printer has suddenly stopped working. Red lights are flashing alternately. A message on your computer screen says or "Parts inside your printer are at the end of their service life."

The Epson 1390 resetter is a small device that connects to your printer and resets the waste ink pad counter. The waste ink pad is a critical component of the printer that absorbs excess ink during the printing process. When the waste ink pad becomes full, the printer will stop functioning, and you'll need to replace it. However, with the Epson 1390 resetter, you can reset the counter and continue printing without replacing the waste ink pad. Keep the Main Pad Counter box checked

In the Model Name drop-down menu, choose . Set the Port to USB001 (or the corresponding USB port your printer is plugged into). Step 3: Access the Maintenance Menu Click on the "Particular adjustment mode" button.

Select the counter checkboxes and click . A confirmation prompt will appear.

Scroll down the list of options until you find the section. Select Waste ink pad counter and click OK . Step 5: Check and Reset the Counter If you reset the counter multiple times without

Gently pull this tube out and extend it using an extension line.

: These are desktop applications (often found on sites like PrintService.Best ) that allow you to "initialize" the printer’s memory.