Attach the front stabilizer (the one with wheels) to the front of the main frame using the provided carriage bolts and nuts. Attach the rear stabilizer to the back of the main frame.
Identify the Left (L) and Right (R) pedals. The left pedal is reverse-threaded, meaning it turns counter-clockwise to tighten.
If you find that your DP Dual Trac 20 is missing a part, especially on a used machine, there are a few things you can do:
Verify that every nylon locknut has engaged its bolt threads fully. Assembly Instructions Dp Dual Trac 20 Manual Pdf
Slide the guide rods down through the top frame into the base housing.
Connect the tension cable from the main frame to the tension knob mechanism. Mount the tension knob on the upright frame.
Fix the padded seat and backrest onto the brackets using smaller machine screws, ensuring the vinyl is aligned straight. Step 3: Top Frame and Overhead Lat Tower Assembly Attach the front stabilizer (the one with wheels)
The seating frame ties the base assembly to the front half of the workout station.
Secure the bottom of the mast to the base beam using long hex bolts.
The DP Dual Trac 20 is a robust home gym system known for its thoughtful design and effective functionality. It’s the kind of machine built to last, which is why you’ll find many of them still going strong decades after being made in the USA. The left pedal is reverse-threaded, meaning it turns
This comprehensive guide serves as your unofficial assembly manual. It breaks down the step-by-step construction, pulley routing, and maintenance requirements to get your machine running smoothly. Pre-Assembly Preparation
Place the front and rear base stabilizers flat on a level floor. If possible, assemble the machine on a rubber gym mat to protect your flooring.
The Dual Trac 20 is unique because it bridges the gap between a pit bike and a full-sized trail bike. Its assembly requires more attention to torque and alignment than a typical department-store bicycle.
: Ensure all pins and locknuts are properly secured before adding weight or testing the resistance. Where to Find Support & Parts Fitness Gear Assembly DIY Step By Step Guide