Convo Inverter Cvf-s1 Manual [upd] Info

The factory defaults require panel control start/stop, but these can be reconfigured for terminal control. 3. Basic Parameter Setting and Operation

The CVF-S1 drive targets low-power environments where compact physical footprints and single-phase incoming power are standard. Single-phase AC 200V–240V, 50Hz / 60Hz. Output Power Range: Typically spans from 0.4 kW to 2.2 kW .

Check motor load for mechanical binds; check insulation; increase acceleration time. Low voltage condition on the main DC bus. Convo Inverter Cvf-s1 Manual

: Designed for single-phase 220V input, providing a three-phase output for standard induction motors.

Programming involves entering the parameter code (e.g., F0.02) and modifying its value. Description Default / Range Running command 0: Keypad control; 1: Terminal control F0.03 Frequency setting 0 (Panel Pot) 0: Panel; 3: AVI (0-10V); 5: ACI (4-20mA) F0.04 Max frequency Standard standard for acceleration/deceleration F0.05 Upper limit freq Prevents the motor from exceeding a safe speed F0.23 User's code Used for password protection (0-9999) 3. Operational Safety The factory defaults require panel control start/stop, but

: Check the main AC line incoming voltage, fuses, and power switches. E.OL (Motor Overload)

The is a high-performance variable frequency drive (VFD) designed to control the speed and torque of three-phase AC induction motors. Now part of the Bosch Rexroth brand, Convo inverters are widely used in industrial automation for general-purpose applications as well as fan and pump control. 🛠️ Key Technical Specifications Single-phase AC 200V–240V, 50Hz / 60Hz

: Check cooling fan operation and clear any vent obstructions. Wiring Faults

The control terminal strip on the CVF-S1 manages commands, logic speeds, and analog signals. Connecting these terminals requires careful isolation from high-voltage main lines. Main Circuit Power Terminals